Import Sony NEX FS100 AVCHD mts file into final cut pro very easily

 

Sony NEX FS100

NEX-FS100 and that is with all the words "Super 35mm," that are emblazoned across the camera's packaging, the device itself and all Sony's promotional literature. The Super 35mm Exmor CMOS sensor actually does make this camera special amongst its competitors -- that is why Sony's marketing and advertising folks seized on it

The FS100 sits firmly inside the NXCAM camp: entry-level skilled camcorders capturing HD to Memory Sticks and SDHC cards making use of AVCHD, an 8-bit, four:two:0, long-GOP, h.264 codec. The majority of its alternatives, settings and camera tweaks will likely be familiar to shooters making use of Sony's NXCAM and pro HDV camcorders, these with HVR- and HXR- prefixes. The FS100 adds seven S&Q (Slow & Quick, a.k.a. variable frame rate) speeds from 1-60fps (1-50fps for the "PAL" version), as well as a 28 Mbps 1080p60 recording mode.

The FS100 does have some advantages-larger sensor, higher resolution (it yields more TV lines), presumably better low-light sensitivity if it shares the F3??s prowess.

It records AVCHD at 24 mbps to an SDHC but also outputs a four:two:two clean signal via HDMI so should work well with an external recorder.

When you come across this camcorder, and you think the camcorder is right for you. Will you also consider the other thing that whether your video editing software can import the video your have recorded with Sony NEX FS100. If you have notice this quastion, I will tell you the problem. If you edit the avchd video with imovie or Final Cut Pro, you can import the video from camcorder. But if you have copy the mts or m2ts file into your computer, and only kept the simgle video, you will not import them into imovie and final cut pro.

To import Sony FS100 MTS to Final Cut Pro you should convert mts to mov which is compatible with FCP. To do this conversion you need an AVCHD video converter to convert the video. Doremisoft AVCHD video converter can help to convert mts/m2ts file to other format like MOV, MP4, DV, WMV, AVI, MPG, 3PG, FLV, etc. With this converter you also can reduce the unwanted clips, and add effect to your video. You can leant how to convert FS100 AVCHD to FCP:

First, you should get a converter, you can download the converter from Doremisoft, then install the software on your Mac, then run it, click "Add File" to load your mts file into the converter.

load video into converter

Then choose output format for final cut pro. Just hit the "profile" to choose "Common Video" > "MOV-QuickTime (*.mov)" as the output video format.

set mov as output format

When you have down the output format setting, you can start to convert mts file to mov. After the conversion finished, you can import the converted video into final cut pro or imovie for editing.

If you have get doremisoft video converter, this converter also will help you do the thing above, bessides, the converter also will hlep you convert mxf to wmm, mts to wmv, to convert flv to mp4 mac also is available. With a converter, all the video format problem will likely be solved. Just get a converter to enjoy your camcorder and travle.